| Here
are some of this years new props pictures. We where very busy
with the TS business this year which didn't leave us much
time to capture pictures of the props after just being built.
You just can't find a life size, smoke
spewing gargoyle when you need one! 2" ABS pipe was run
inside the body to the head for fog. A "2" reducer was glued
on to the end as a duct connection.
Top of Page
That's right, we changed the name again!
I wanted one that gave a general description of what you are
about to enter. This is the same sign as last year. The old
lettering was filled in with liquid urethane foam. Then it
was sanded down to a level surface and re-engraved.
Top of Page
A good friend of ours came back from
Scotland this summer with pictures taken of many cool things.
One of them really caught my eye! It was a stone statue on
the side of a building something like the one above! Ours
is 13 foot tall built in two halves.
Top of Page
Two of our new floor fountains. They
are built from 2" foam board and coated with multiple
layers of tile mortar and UGL water proofing paint. The fountain
to the right is based on the bamboo style fountains. Water
flows out of the short upper pipe and fills the angled pipe
below. Making it tip down and emptying into the pot in front.
Both fountains worked great adding sight and sound to the
haunt.
Top of Page
Another static monster mud prop we
called the "Guard".
Top of Page
The Hanging Man prop is another Pneumatic
creation. An air piston in located in the leg area which causes
him to jerk his legs out straight. This makes him thrash about
as if just hung by the neck.
Top of Page
These pictures are very poor in quality.
I had to take these shots with a flash at night before it
went into storage. This is the Cage prop. When triggered the
pneumatic guy inside thrusts forward pushing his head out
between the bars.
Top of Page
A last minute static prop we used to
fill some empty space inside the haunt!
Top of Page
The Ozzy prop using the 2 Scary Guys
"Body Slinger" design.
Top of Page
The Air Cannon is a very simple yet
effective scare combining both sound and a large blast of
air. Plans for this cannon can be found in Phil Millers book
available from Underground Entertainment.
Top of Page
Well everyone and their brother was
talking about silk flames this year. Below are pictures of
the two units we put together for our Halloween party. The
wall sculptures are from our GraveStalkers product line mounted
to 1/4" lauan plywood. A wood box conceals the flame
machine on top of each sculpture.
Top of Page
|
